EDV-Technik-TS


	Welcome to our website for MIDI to CV Converter Here we present our MUC model series since 2010


	MUC-810 KIT 239,- EUR incl. VAT


		MUC-800 KIT 249,- EUR incl. VAT


	MUC-400 Desktop 239,- EUR incl. VAT


		MUC-500 Desktop 329,- EUR incl. VAT


	MUC-400-V2-Eurorack 259,- EUR incl. VAT


	MUC-400-V2-KIT 159,- EUR incl. VAT


	MUC-300-V2-KIT 129,- EUR incl. VAT

Vorstellung: Midi Universal Converter (MUC)

Die MUC Modellreihe ist das professionelle Bindeglied zwischen MIDI-Daten ausgebenden Geräten wie z.B. PC, Sequenzer, Keyboard und analog ansteuerbaren Synthesizern.

Die besonderen Features sind die vielseitig zur Verfügung gestellten Funktionen und Spannungsbereiche die sehr flexibel für jeden einzelnen Ausgang unabhängig voneinander konfiguriert werden können. Die große Anzahl von bis zu 16 CV Ausgängen erlaubt es entsprechend viele VCOs gleichzeitig auf beliebige MIDI Kanäle anzusteuern. Auf Grund der hohen Auflösung von 16 bit können Sie problemlos Glide- und ADSR-Funktionen konfigurieren.

Durch die sehr übersichtlich gestaltete Menüführung auf dem kontrastreichen 4 oder 8 zeiligen Display, können alle Konfigurationsänderungen gleich direkt am Gerät vorgenommen werden. Neue Einstellungen sind sofort am Ausgang zu beobachten und werden ganz automatisch in einen nichtflüchtigen Speicher übernommen.

Für die visuelle Kontrolle bezüglich Signaldauer und Spannungshöhe einer Steuerspannung, besitzt jeder Ausgang seine eigene rote LED. Eingehende MIDI-Daten werden durch eine weitere, grüne LED visualisiert.

Die starke Performance der MUC Modellserie wird durch die Verwendung modernster Hardwarekomponenten wie Mikrocontroller und DA-Wandler erreicht, wodurch die Umsetzzeit (delay) bei maximal 0,4ms liegt! Firmware Updates sind durch den integrierten Bootloader über den MIDI In Eingang problemlos möglich. Unsere Firmware, die bereits in der 8. Version vorliegt, bietet dem Anwender einen sehr großen Funktionsumfang, der kaum noch Wünsche offen läßt.


	Presentation: Midi Universal Converter (MUC) The MUC models are the professional unit to link between MIDI devices, such as PC , sequencers , keyboards and controllable analog synthesizers. The special features at the MUC are the many different output functions and voltage ranges, what can you configure very flexibly independently for each output. The large number of up to 16 CV outputs allows to use a corresponding number of VCOs. Due to the high 16-bit resolution, you can easily configure Glide and ADSR functions. Due to the very clear and simple menu operation on the high-contrast 4 or 8 line display, all configuration changes on the unit will be very easy. New settings are immediately observed at the output and be automatically transferred to a non-volatile memory. For visual control with respect to signal duration and voltage level of a control voltage, each output has his own red LED. Incoming MIDI data is visualized by a green LED. The strong performance of the MUC model series is achieved by the use of the latest hardware components such as microcontrollers and DA converters , so that the conversion time (delay ) is a maximum of 0.4 ms! Our last MUC model (MUC-8xx) supports now polyphonic with velocity up to 8 voices. Firmware updates are easily possible through the integrated bootloader via the MIDI In input. The firmware that is already in the 8th version, we can you offer many number of output functions.


	MUC-8xx Series


	MUC-5xx Series


	MUC-4xx Series

	MUC-810-KIT MUC-800-KIT	MUC-500-Desktop MUC-510-Desktop	MUC-400-Desktop MUC-400-V2-Eurorack MUC-400-V2-KIT
CV output	Features: Number of CV outputs: 16 (Out 1-16) Resolution: 16bit Maximum voltage: 10V Voltage range: 0V..5V, 0V..10V, -2,5V..2,5V, -5V..5V, -5V..0V Tune resolution: 0,325mV Functions: Volt/Octave with pitch and (auto)glide support Tirg, gate, sync, velocity, release, pitch, controller, pressure Hz/V (Voltage range: 0,5 - 10V)	Features: Number of CV outputs: 8 (Out 1-8) Resolution: 16bit Maximum voltage: 16V Voltage range: 0-5V, 0-10V Tune resolution: 0,325mV Functions: Volt/Octave with pitch and (auto)glide support Tirg, gate, sync, velocity, release, pitch, controller, pressure Hz/V (Voltage range: 0,5 - 16V)	Features: Number of CV outputs: 8 (Out 1-8) Resolution: 16bit Maximum voltage: 10V Voltage range: 0-5V, 0-10V Tune resolution: 0,162mV Functions: Volt/Octave with pitch and (auto)glide support Tirg, gate, sync, velocity, release, pitch, controller, pressure Hz/V (Voltage range: 0,5 - 10V)
Digital output	Functions: Trig, Gate, Sync 8 x 5V-Trig or 10V-Trig (for 10V remove solder bridge)	Functions: Trig, Gate, Sync MUC-500: 8 x 5V-Trig 8 x S-Trig MUC-510: 8 x 10V-Trig 8 x S-Trig	Functions: Trig, Gate, Sync MUC-400: 8 x 5V-Trig MUC-400-V2-Eurorack: 8 x 5V-Trig
Polyphonic support	Up to 8 channels with velocity	Up to 8 channels no velocity Up to 4 channels with velocity	Up to 8 channels no velocity Up to 4 channels with velocity
Glide	Selectable for each CV output	Selectable for each CV output	Selectable for each CV output
ADSR Envelope	Selectable for each CV output	Selectable for each CV output	Selectable for each CV output
Spread (Volt/Note) adjustment	With 16 potentiometer for each CV output	With 8 potentiometer on the backside from the MUC	With 8 potentiometer on the backside from the MUC
Number of setups	4	4	4

Firmware update	With integrated bootloader	With integrated bootloader	With integrated bootloader
Material of the case	Synthetic	Aluminium	MUC-400: Synthetic MUC-400-V2-Eurorack: Alu
Jack-Type	3,5mm	3,5mm	3,5mm
Split Key Note Space in 2 separate Note Ranges	To play 2 synthesizer with left/right hand Support monophon AND polyphony	To play 2 synthesizer with left/right hand Support monophon AND polyphony	To play 2 synthesizer with left/right hand Support monophon AND polyphony

Please Note: The MUC-3xx Series is a low budget version.

This series only has an 8-bit DAC instead of a much more expensive 16-bit DAC, although all voltage spreads are of course output correctly, as with the 4xx and 8xx series. Only smooth voltage transitions cannot be achieved with 8-bit resolution. This means that the following functions are not available or are not implemented correctly in the MUC-3xx series:

Fine tuning is only possible on your analog synthesizer.
No glide functions.
No ADSR function.